Multifunctional electric beds need to be used correctly

1, before the use of multi-functional electric bed, first check whether the power cord is firmly inserted. The controller cable is reliable.

2, the controller linear transmission wire, the power line shall not be placed between the lifting rod and the upper and lower bed frame, so as to avoid the wire being cut, resulting in personal equipment accidents.

3. After the back board is raised, the patient lies down on the panel and is not allowed to push it.

4, people can not stand on the bed surface jumping, backplane rising, people sitting on the backplane and standing on the bed panel, not allowed to promote.

5, after the universal wheel brake, it is not allowed to push and move, only after loosening the brake can move.

6, do not allow horizontal implementation, so as not to raise the guardrail damage.

7, uneven road can not be implemented to prevent the electric hospital bed universal wheel damage.

8. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action. It is not allowed to press more than two buttons at the same time to operate the hospital bed, so as not to cause misoperation and endanger the safety of patients.

9, when the multi-functional electric bed needs to move, the power plug must be removed, the power control line is wound, and the square can be pushed.

10. When the multi-functional electric bed needs to be moved, the lifting guardrail should be lifted to avoid the patient falling and being injured during the moving process. When the electric bed moves, two people must operate at the same time, so as not to lose control of the direction during the implementation process, causing damage to the structural parts, and endangering the health of the patients.